 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I replaced the blade drive belt on my old murray riding mower and now it won't start. No noise what so ever. Had just put a new battery in it so that's not the problem. I pulled the fuse and it looks fine. I don't know anything about wiring so can you help?:confused:
I have an old murray riding mower. The blade drive belt keeps coming off. I am afraid I am not putting it on right. It is a brand new belt. Is there anywhere to go and see a diagram to be sure it has been done right? |
||||
Check out some similar questions!
All right little backround... just bought this mower off craigslist have not even used it 4 times. Mower would not start last time I went out to mow the lawn... neighbor came by turned the flywheel until it was loose and then poof it started up, he used it the rest of the afternoon, started a bunch...
I have a 17.5 murray riding mower it won't start I have a new battery I jumped across the two big post on soleloid it will turn over then does that mean the soleloid is bad if the safety switches were bad would it crank by jumping the soleloid how do you check the soleloid and switches...
I have a yard man riding lawn mower. One day while using it, it did a big surge and I fell off. I had to push it back down because it was sitting up on its two back wheels, now it will not start. I tried to change the spark plug and tried the battery but nothing works. Please help
I know it is the solenoid but its been off for a while and to tell you the truth I can't remember how it wires back up if any one can tell me or send a pic of the wiring diagram I would appreciate it. The little green wire and the little red wire are what's giving me problems can't remember where...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
