Fan installation

wayne leong Posts: 1, Reputation: 1

New Member

Jul 25, 2008, 03:33 PM

Fan installation

Can you operate the fan and light /both functions from 2 standard three way switches

ballengerb1 Posts: 27,378, Reputation: 2280

Home Repair & Remodeling Expert

Jul 25, 2008, 03:41 PM

Yes but not independently.

Add your answer here.

Check out some similar questions!

Hot tub installation on 100 amp [ 5 Answers ]

Hi, I am buying a new home (being built) and the house comes with 100 amps electrical circuit, I want to put in a hot tub once the house is done but I read online and on this site that 100 amps might not be enough, is there a way to upgrade later on or should I ask the builder if they can do 200...

How do I use this installation? [ 1 Answers ]

I installed filezilla but it won't let me use it!

NF8 Installation [ 4 Answers ]

I replaced an NF8 on the outside of my house. First, was it right to use plumbing tape to minimize leakage. Second, its still leaks a little - is there anything I can do to stop the leak. Third(and most important), when you go to turn off the water all the water in the hose will suddenly blast...

Fan installation [ 2 Answers ]

After I installed a new fan, the fan now turns on and off with it's remote control, and not with the wall on and off switch. Initially there was a fan that was turned on and off with a double wall on/off switch. When I dismounted it, coming from the ceiling there were three white wires connected...