Ask Experts Questions for FREE Help !
Ask
    johneshred@verizon.net's Avatar
    [email protected] Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 5, 2006, 02:33 PM
    How to replace boot
    How do I replace rubber boot on my Two year old Maytag Neptune washer?
    applguy's Avatar
    applguy Posts: 324, Reputation: 23
    Full Member
    		  
    #2

    Apr 5, 2006, 05:54 PM
    You have to remove the front panel, door, remove the dispenser cover/frame and raise the top, remove the front shroud, then remove the cable and spring that secures the boot to the tub cover. Getting the spring and cable back on can be tricky, and the alignment indicators are easy to miss. If you need additional help, let me know.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trying to replace a shower with a tub [ 1 Answers ]

Could anyone tell me how to replace my shower with a tub? My father said that it would be difficult, but a plumber that was out unclogging our pipes said that if the drains did not match up we could run extension pipes. My father says only if we build up the floor first. I need to know the...

Need to replace thermostat? [ 2 Answers ]

Problems with programmable Honeywell thermostat and heating. New batteries put in a week ago. Basically it isn't necessarily following the scheduled program. Get up in the morning and the house is cold, cold, cold. The fuse box has a line run to the furnace. The line runs through a mounted...

Should I replace or repair my TV? [ 5 Answers ]

My TV has a white horizontel line across the screen, dividing the screen in half. Above the line the screen is totally black and below the line the picture is normal. It's a Samsung 25" TXE 25346.

Replace tub with shower [ 3 Answers ]

I removed the old tub and exposed the drain pipe. Where the drain pipe comes through the slap there is a 8x8 hole to allow the tub drain pipes to fit. I'm going to install new drain pipes for the tile shower which consist of a 90 coming out of the main drain pipe then 6" to another 90 that will...

Trying to replace a 24 vac transformer [ 3 Answers ]

Hi Everyone, I need instructions on how to wire the junction box where the 120 vac power, the fan limit, and the blower motor wires all come together. I undid all the wires and got confused on how to put it back together. Here are the facts: 25 year old Rheem gas hot air upright furnace. Three...

View more questions Search