Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing a Noma 5+2 on a Whalen Series IV Heat Pump
[ 3 Answers ]
Hi All I just moved into a condo not too long ago and have a Whalen Series IV heat pump/AC. The wires from the unit are G, B, Y, W, & R. They are plugged into a Simple Comfort 2001 thermostat. In the thermostat the connections are G, B, Y, W, C, & R. The yellow wire from the unit goes into...
NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue.
[ 11 Answers ]
I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -
Why does my air handeling coil freeze up when the heat pump is in heat mode?
[ 3 Answers ]
I have a TRANE XL 1200 heat pump. When in the heat mode the air handeling coil freezes up, enough to block the air flow. I can turn the heat pump off and leave the air handeling unit air circulating fan on and get the ice melted. After 30 minutes or so I can turn the heat pump back to the on...
Ductless A/C with Heat Pump - Heat pump does not come on
[ 1 Answers ]
Hi The A/C works great but in the morning when its cool outside and I switch on the Heat the indoor unit makes a clicking sound and the fan stays off - after about 8 minutes I switch to A/C I get a rush of ice cold air along with some mist. Seems like when I switch to heat the indoor unit...
Installing a signal wire for a heat pump change over valve
[ 2 Answers ]
My wife and I just bought a house and I was thrilled when I saw that the outside unit was a heat pump (a Goodman ck36-1b model, to be exact). Well, today was the first day that we were to run the heat, and I noticed that the furnace kicked on immediately. "Strange," I thought, "doesn't the... View more questions Search
|