Ask Experts Questions for FREE Help !
Ask
    Dontknow321's Avatar
    Dontknow321 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 19, 2008, 05:53 PM
    Cleaning waterheater filter
    I have a State Select waterheater Model # GS640 YBRT and I just noticed that I'm to clean the filter every six months--I've had it for two years. I pulled up the State Select web site and it looks to me like I have to remove the whole rim at the bottom of the waterheater. Could this be correct? Thank you.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Jul 19, 2008, 07:05 PM
    What filter are you referring to.
    Dontknow321's Avatar
    Dontknow321 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 19, 2008, 09:16 PM
    Sorry, I should have said Air Intake Screen.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tankless waterheater [ 5 Answers ]

Hi, I bought a tankless waterheater to replace one waterheater with tank. The original breaker was 30 amp and the tankless requires 60 amp breaker and No. 6 gauge wire. My question is if I do not change the breaker and wire, what adverse effect it may have on the water heater itself? The...

Pump won't lite after cleaning filter and inner filter [ 1 Answers ]

Filter was complet mush and guk, also in the pump I took out and cleaned the screen , all good now, I primed filter and pump but still would not ignite. Blnk blk blk, after 3 second hold button furnace attempts then must hold for 30 secs to reset from lockout. SO after many attemps, "does it every...

View more questions Search