 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ceiling fan w/lights & remote control
I am building a sun room that will have a ceiling fan with lights. I want to turn the lights on and off from 3 different locations (4-way switching). I also want to control the lights from a remote control. Does anyone offer a remote that will control the fan speeds, light dimming and also interface with the 4-way switching?
|
||||
|
||||
|
You can but it will be complicated. You will need to get a remote kit that is available to have both handheld RF switching and wall mounted RF switching. Then, you will need to buy the wall mount transmitters that are capable of being wired as 3/4 way. Often times they do not wire like a typical 4 way setup however you will want to make sure the wiring in your sunroom is compatible with a typical 4 way setup in case you ever replace the fan or controls.
Are you sure you need all these switches? |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
?? Hi I have a hampton bay sidewinder ceiling fan that came with a wall mount remote control. I wanted to have a hand held remote control, so went and purchased a remote control that came with its own receiver (hunter). I replaced the original receiver with the new receiver. The hand held...
I have a Hampton Bay Video & Fan Remote Control (Model #UR8050T). It has been working fine for about 2 years until it recently began malfunctioning. It still operates the television, but the use of the fan/light features has stopped working. It will not turn the fan on or off, and the light is...
Hi We just bought an Aloha Breeze remote control fan. We put it up as directed as we have put up several fans in the past. This is our first try at one with a remote. The fan came with a hand held remote and the receiver. The wiring diagram that came with it is hard to see and there are no precise...
I have a Hampton Bay Windward II 54” ceiling fan and fluorescent lamp with remote control. I replaced the original fluorescent circline lamp with a new one. Now the light won’t turn won’t stay on or dim and the fan operates properly. Any ideas?
Hi -- I just replaced the transmitter/receiver on my remote control light/ceiling fan, and it's working just fine. Thing is, before I installed it, I noted that the new control set said not to use on solid state ceiling fans. Because I didn't buy the fan in the first place, I wasn't sure of even so...
View more questions Search
|
