Ask Experts Questions for FREE Help !
Ask
    shibly's Avatar
    shibly Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 13, 2008, 06:40 AM
    Pressurisation unit
    Kindly let me know how to calculate the capacity of the pressurisation unit the gpm and the head of the pressurisation unit and the selection if this unit is on the same level of the chiller and primary / secondary pumps if the volume of the system is around 9050 lts, any body can help me out in this.
    sureshgmore's Avatar
    sureshgmore Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Sep 4, 2008, 11:36 PM
    Why to use diaphragm pressure gauge instead of Bourdon gauge.
    joshy george's Avatar
    joshy george Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Oct 28, 2008, 05:09 AM

    Kindly let me know how to calculate the pressure vessel size,gpm and the head of the pressurisation unit, for using to fill the chilled water closed loop circulation system looses due to small leakage or some other cause.following are the details.
    System volume 19 m3
    Vertical hight 105m
    Chilled water pump discharge 59LPS @ 4Bar
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pressurisation units sizing [ 1 Answers ]

I seek information as to how do we size the pressurisation unit in a chilled water system including the major components details and their specs.

Pressurisation Unit for chilled water circuit [ 1 Answers ]

What is the Need of Pressurisation Unit , In Chilled water Circuit . Of a building served with distric colling Plant, and How does that Pressurisation unit functions? Where Is it Installed, (Before the heat exchangers or after the heat exchangers)?

Staircase Pressurisation in multi storied building [ 1 Answers ]

Hello, I, gowrish working as a jr. engineer in one of the developing organisation in bangalore. Could any one help in knowing about staircase pressurisation. Means why it is needed, how to calculate and other. Do the needful.

Pressurisation unit [ 1 Answers ]

How to design or choose a pressurisation unit for a chiller plant?

Head of pressurisation unit pumps [ 3 Answers ]

Hi... I am doing a 6 storied building project for which I need to determine the head required for the pressurisation units. THe CHW pumps and heat exchanger are located at the basement and the chilled water is provided from District Cooling Plant at 16 deg F delta-T. How can I determine the...

View more questions Search