Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Comfortmaker Furnace Help
[ 4 Answers ]
My Comfortmaker Furance (GUG070A012N) will not always kick-in at the set temp level. The Thermostat is verified operational and good. Most times the heat will kick in, but the fan blower will not run. If I remove the panel and spin the fan manually, sometimes this will engage the fan and the...
Rpj comfortmaker combo
[ 1 Answers ]
Just changed the control module because not enough voltage was going to the ignitor plug. Then the glow plug needed changing. Worked great for a few days. My 4 yr old messed with the thermostat then the heat didn't work again. Pulled the plug on the furnace to reset, then took the batteries out of...
Furnace blower control malfunction
[ 4 Answers ]
My 15 yr old Bryant 394GAD gas furnace started this fall by doing everything OK except that when the burner clicked off, the blower would cycle off and on 2-4 times before shutting off completely. Now the problem has progressed to where the blower won't shut off at all after the burner is shut down...
Comfortmaker
[ 1 Answers ]
Not cooling
Comfortmaker
[ 1 Answers ]
My Unit Has A Loud Running Noise And Upon Shut Down There's A Loud Clank Sound... What Could It Be View more questions Search
|