Ask Experts Questions for FREE Help !
Ask
    jp_204's Avatar
    jp_204 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 7, 2008, 10:05 AM
    Lawnmower repair
    Hi How do I change a drive belt on a try built front wheel drive 21" lawn mower?

    <moved>
    kgl1919's Avatar
    kgl1919 Posts: 24, Reputation: 3
    New Member
    		  
    #2

    Jul 10, 2008, 11:53 AM
    Usually there is a belt cover between the front wheels that must be removed to reveal the transmission. The transmission can be tilted backwards either by removing or pulling against a spring, or by backing out a screw that runs down to the deck. Either way, the trans tilts backwards to take tension off the belt, slip the belt off the trans pulley, feed it back through the hole between the deck and the engine, down around the blade and off. Feed the new belt up around the blade and out to the trans, reverse previous process.
    patl's Avatar
    patl Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Apr 19, 2009, 10:57 AM
    How do you replace string on lawn mower?
    patl's Avatar
    patl Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Apr 19, 2009, 10:58 AM

    How do you replace pull string on lawn mower
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lawnmower Help [ 10 Answers ]

My lawnmower, Murray Select w/Briggs?Stratton engine, will start but will not get up to speed. It only putt-putts and kicks out a lot of smoke. Any suggestions?

Trying to repair my credit is using a credit repair agency any good? [ 10 Answers ]

Hi I am trying to repair my credit in the USA but don't know about using a US credit repair agency. Has anybody has any advice? Thank you C

Lawnmower repair [ 1 Answers ]

I have a yardman mower that has three belts on the deck that are broken and I don't know how the go back on, I need a diagram showing me this.

Lawnmower repair [ 1 Answers ]

How do I change the drive belts on a mtd riding lawnmower with a tuechumce motor. Do I have remove, both motor and drive pulley?

I put too much oil in my new B&S lawnmower [ 3 Answers ]

:mad: Being new to this whole lawn care thing after recently firing my gardener, I did something stupid. This morning was the 2nd time I attempted mowing. I started it up and did half the lawn and the mower started sputtering a little and ended up dying and when I tried to start it back up there...

View more questions Search