Ask Experts Questions for FREE Help !
Ask
    kbrug3's Avatar
    kbrug3 Posts: 2, Reputation: 1
    New Member
     
    #1

    Jul 5, 2008, 03:36 PM
    Dryer not working/removing panels?
    I have a 2yr old Frigidaire model FERB7800DSO.
    I was in the middle of a load of laundry the other and it stopped running. Someone mentioned to remove the front and top panels to check my belts. There are absolutely no screws or kick plate on the front of my dryer. Any ideas?
    Thanks

    Ps.. I just found a small vent in the back and opened that, from there I can see the drum belt as suggested on another post. It is in place and very tight making me believe that it's not the belt.
    Any other ideas and please tell me (if you know) how to get to them?
    EPMiller's Avatar
    EPMiller Posts: 624, Reputation: 37
    Senior Member
     
    #2

    Jul 6, 2008, 07:27 PM
    Is there power to it? Does the motor run? Does the drum rotate easily by hand? Don't rotate it very far in reverse, you can derail the belt on some models! Does the timer run? Is the door closed correctly? Need more information but it sounds like you will need a repairman if you aren't familiar enough with appliance repair to take it apart. No offense intended.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My dryer is not working [ 3 Answers ]

I need to change the breaker so my dryer can put out the heat that is required. How do I change a breaker inside the breaker box?? :confused:

Dryer no working [ 2 Answers ]

My stop dryer stop before the time is up what could it be?

Ge dryer not working [ 1 Answers ]

Dryer was working until I turned the start knob. There was a pop sound and we thought all we had to do was replace the knob. After replacing it we tried to start it and nothing happens. If you put your hand on it while turning the start knob you feel a faint vibration

Gas Dryer Not Working [ 9 Answers ]

Need help please: Dryer Model Details MOD: 110.76812695 SERIAL: MJ3620970 TYPE: DWSR-NAT-1206006-CV22 Started about year ago and I ignored it :( The dryer for some reason stopped getting warm for certain Fabruic Temperatures: High Cotton stopped working, so I just used permanent press ...


View more questions Search