Barriers to entry

legendz85207 Posts: 1, Reputation: 1

New Member

Jun 30, 2008, 03:54 PM

Barriers to entry

What are the barriers to entry for a perfect competition market?

Thomcollects Posts: 15, Reputation: 4

New Member

Jul 7, 2008, 07:42 PM

There are no barriers to entry for a perfect competition market. It is the ideal.

Hope this helps.

Add your answer here.

Check out some similar questions!

Shower and Floor Tile Vapor Barriers [ 2 Answers ]

I have recently became interested in a Canadian Show called "Homes by Holmes" (Mike Holmes). This guy is fantastic and I believe in the same leaque a Tom Silva (This Old House). Mike uses vapor barriers I have not seen used in the US. He uses an orange colored vapor barrier in the shower (shower...

Radiant Barriers [ 1 Answers ]

We are building a 3650 square foot home in Land O Lakes Florida. We have upgraded our windows to two pane low e, have insulated our garage door, and are having foam injected into our cinder blocks. The home is basically one story with a 750 square foot bonus room upstairs. THe builder quoted...

Fitch barriers? Hmm [ 3 Answers ]

would a car with most momentum penetrate most deeply into an array of fitch barriers? I think so but am not sure. Also, out of these two cars which occupants would sustain worst injuries? car 1-mass=1200 kg, velocity=50 km/h car 2-mass=1500 kg, velocity=40 km/h and finally!. if running...

Barriers of apologizing [ 3 Answers ]

You know how important apologizing is now, but you just can't bring yourself to doing it. Maybe you are experiencing excessive workloads and stress. Maybe you don't have the guts to confront the person face-to-face. If this is the case, I encourage you to build your confidence and throw away your...

Vapour Barriers... [ 2 Answers ]

I am about to undertake finishing my basement. I have decided to use Delta-FL for the flooring. For those not familiar, it is a dimpled High Density Polypropolene sheeting. The Delt-FL is laid down first, then 5/8 tongue and groove plywood. (See image or following link for more detail...