Ask Experts Questions for FREE Help !
Ask
    SouthTexas's Avatar
    SouthTexas Posts: 4, Reputation: 1
    New Member
     
    #1

    Jun 29, 2008, 03:18 PM
    Atlas Rear tine rototiller
    Hello All,
    I am new to the site and already I see I like it a whole bunch.

    I need some information. I have bought a " Atlas Rototiller " Model ART 48
    And am in need of a bronze gear down in the tine drive transmission.
    After doing some research I know Atlas built snowblowers back in 1978 on up to1995 and all kinds of other equipment but no one seems to know anything about Atlas down here in the south. According to the information I got off the Oscar Wilson website the young lady at the Oscar Wilson parts division said that Atlas was bought up by " Lawn Chief " and the only thing that came up on their computer was a ART48-N model who was produced by Lawn Chief. Later I found out that Lawn chief was a store brand name for True value.
    Can you please put me in contact with somebody whom can help me as I am in need of part # 624452? Unfortually when I gently rubbed the only numbers on the sticker on the side of the frame they wiped right off with that wisk of my finger, (And I only thought they were hard to read when I started). After reviewing the pictures and parts list I got from the folks at Oscar Wilson I know this is the right machine by all the pictures and identifying parts.

    The Oscar Wilson parts list for the ART48-N is as follows
    (S/N 522474-522493-522492)
    (O/M 542190)

    Thanks and God Bless
    Gary C. in South Texas

    e-mail [email protected]
    SouthTexas's Avatar
    SouthTexas Posts: 4, Reputation: 1
    New Member
     
    #2

    Jun 29, 2008, 03:37 PM
    Hello All
    I just found this on www. Donaldsantiquerototillers.com

    Atlas Power Equipment Co.
    General Power Equipment Co.
    Harvard, Illinois 60033

    General Power Equipment was the parent company of Atlas, Lawn Chief, and Wheeler.
    All three brands became the property of MTD.

    The real question is does anyone know where to get that bronze worm gear I am in Need of?

    Thanks all
    Gary C.
    Phrnzy's Avatar
    Phrnzy Posts: 1, Reputation: 1
    New Member
     
    #3

    Sep 23, 2012, 08:27 AM
    I need the same gear and sent it to a gear shop, they can make them but they aren't cheap, If a few people still need this gear we can get a decent price. This gear is used on many brands of tillers.

    Chuck M.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Mtd front tine tiller [ 3 Answers ]

I have an older mtd tiller model no. 119-200-004. I am having trouble to get it in reverse.would any one have a parts manual. I e-mailed mtd but I figgered I would ask here while I was on site. The motor was built in 1968 so it is an older machine. Just tought someone might have one. Thanks, ...

Vey old Atlas Gravity Heater with an Itt General [ 5 Answers ]

Controls B67 Gas Valve. Need to replace 2 wire thermostat. Hate to sound stupid but can not see anywhere on this furnace or on the newer (but still old) gas valve where you turn off the power? Do I just turn it to off and then can replace the upstairs thermostat?

Cairo Resembles Something On Atlas? [ 2 Answers ]

Dear; I'm Told That Cairo's Map Seen From Above On Atlas Resembles Something But I've been unable to find Out What Is That. If Someone Could Help Me(Accuracy will be appreciated). Khuda hafiz

1978 model MTD Rototiller - need manual [ 1 Answers ]

Would like to find manual for 1978 MTD Garden Tiller. Any out there?


View more questions Search