Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Running in wall Coaxial Cable from Existing wall
[ 7 Answers ]
Hi there, Is there someone here who is expert on electrical? I need help on running coaxial cable to my existing walls. I have a 1st floor where I have access to drilling holes into the second floor. I am willing to cut open holes for installing the single gang boxes. Now, here are my...
How to support a load bearing wall, need engineer, cement wall
[ 3 Answers ]
I want to remove about 6 feet from an interior wall. The rafters run parallel with the wall but the reason I think it's load-bearing is because one of the trusses rests on the middle of the wall with a lateral x across it. I have existing pictures and a drawing of "the existing" and what is...
Fasten stud wall to concrete basement wall
[ 3 Answers ]
Planning to finishout a basement with stud walls on concrete floor. Planning to use Tapcon fasteners and treated 2x4 for bottom plate. Trying to protect for termites and moisture from the concrete. Thought about using a sill gasket. That would help the moisture but what about termites? I asked...
Installing half wall in load bearing wall
[ 3 Answers ]
We are attempting to make our kitchen open concept with our living/dining room by creating either a half wall or putting in a window (what is the correct name for that?) The wall is load bearing. Do we need a permit for that type of reno? What would be a realistic budget to set aside for that...
Hampton bay fan came with wall remote but Fan is not operated from a wall switch.
[ 1 Answers ]
I received a New Hampton Bay fan to replace an existing fan. The existing fan is operated by two pull chains. The new fan came with a wall control device. The problem is that the fan is not operated from the wall switch and there are no pull chains. Can I use a Hampton Bay remote with the... View more questions Search
|