Ask Experts Questions for FREE Help !
Ask
    cindy6700's Avatar
    cindy6700 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 20, 2008, 02:14 PM
    17 hp briggs and stratton
    What is the gap on a 17 hp ohv adjustment
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #2

    Jun 20, 2008, 07:40 PM
    .005" intake and exhaust

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs & Stratton 14.5hp OHV - Won't Run [ 8 Answers ]

I have a yard machine mower that was running great. It shut off in the middle of cutting and that was that. If I pour gas in the carb it tries to start, so I know I have fire. I have plenty of gas going to the carb and the solenoid on the bottom is working fine. I had the carb off, took the main...

16.5hp briggs & stratton [ 3 Answers ]

Motor starts and runs for 10-15 seconds and then dies. Noticed lot of gas around air filter. Had carb rebuilt and still same problem.?

Briggs and stratton 12.5hp [ 1 Answers ]

I just got a 28v707 12.5 hp rider. It doesn't start but turns over almost excessively easily. I have a weak spark but no attempt to catch even with starter fluid. No seen problems with the flywheel or the key.

Briggs and stratton [ 6 Answers ]

My briggs and stratton lawnmower was running great then started spluttering. Cleaned air filter changed spark plug still the same. Spark plug goes a sootie black colour in 30 secs. Also its pulsing badly with a bit of black smoke. Any help welcome ...

16.5 hp briggs and stratton [ 2 Answers ]

I have an older 16.5 hp Briggs and Statton riding mower,and have had the starter rebuilt. I was told that before I put it back on the mower I need to have "The Valve" turned or it would be pointless.My question is what valve needs to be turned and where is it located.I am assuming I would takr the...


View more questions Search