Ask Experts Questions for FREE Help !
Ask
    PearlMartha's Avatar
    PearlMartha Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 20, 2008, 07:30 AM
    No AC, to AC not ready alarm screen
    I've been in my house for about 2 years now, and just yesterday my alarm went to "no ac" and lights on the ready or armed are not there. The panel is still lit and the motion sensors are active. This morning I messed with it again and no longer is " no ac" there.
    "AC is now showing" not ready is being displayed in the screen. How do I reset it? Do I have to do a new code? Please assist, and it's a Honeywell, not sure of model#.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jun 20, 2008, 12:47 PM
    Check your circuit breaker to this panel. No AC could mean no alternating current rather than air conditioning. I think you popped a breaker.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    Jul 2, 2008, 01:20 PM
    Your panel gets its power from a 16.5? Transformer, and if power goes out to the receptacle or transformer fails, "no ac" will show, when restored, the indication should go out. The battery will take over and continue taking care of system until battery is drained.
    Is this your system?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Emerson 20in LCD Flat Screen. Model No. EWL20S5C with split screen [ 5 Answers ]

Hello,I have an eight month old Emerson 20in LCD Flat Screen. Model No. EWL20S5C My sound is great. My picture is distorted. Seems it has a divided screen. With little movement of the actual picture. Colors are way off. And none of the controls work except for channel up and down work, but very...

Blank screen after xp splash screen and then hangs [ 2 Answers ]

My colleagues and I work in a tech environment and we have seen several computers with the same symptoms. Namely a failure to boot xp. After the xp logo screen the screen goes to blank and it just hangs. This looks like a graphics card fault but changing card does nothing. Booting into safe...

Torn Screen In Screen Door [ 3 Answers ]

We have a pretty standard screen door, and the cats ripped a hole in it . And now they are jumping through... I have a big roll of extra scree, are these changeable? OR do you replace the panel? Is there a stronger screen than that flimsy black stuff?

Car alarm keeps going off [ 2 Answers ]

I guess the guy I got the car from hooked up his alarm to the battery. The battery is dead I guess but now the alarm won't stop going off. I've tried everything with the remote but no hope. Is it the battery?? :confused:

Having a problem moving my address bar from bottom of screen to top of screen [ 11 Answers ]

Hello everyone, I can't seem to bring up an address bar at the top of the screen because when I right click at the top of the page, the options are not lit up. I could only bring up an address bar at the bottom. Since it gets in the way at the bottom, I would like to know if anyone can help me...

View more questions Search