Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cutting Plywood
[ 9 Answers ]
I am installing the rest of the plywood flooring on the 2nd floor of our house. I have hit a spot where the existing plywood ends about 6" past the stud so when I install the next piece, they will meet over open space. I want to cut the current piece back to the middle of the last stud but don't...
How much plywood 4x8 to cover 200 sq ft
[ 11 Answers ]
contract calls for 200 sqft of sheathing(plywood 4x8 sheets) any thing over that amount, you must call the city. is 200 sq ft(1sq ft= 2.1 linear ft) 400 feet in linear ft. but how many plywood sheets would it take to cover 200 sq feet?
Tiling over plywood
[ 2 Answers ]
:confused: Thank you for your answers;Clear-Mind-Web &Kstar4u, I can't seem to get my hands on the BC building code. But US code states 1" subfloor. A new problem has arisen about tiling over plywood... I forgot to mention this is also a heated floor which would create a lot more flex with the...
Tiling over plywood
[ 2 Answers ]
The bathroom floor to be tiled is 5/8" subfloor with 1/4" ply ontop screwed every 6 inches.Iam trying to convince carpenter that this does not meet code, nor is it a proper base for tiling. I want him to put down hardibacker (1/4") but he has convinced home-owners not necessary. What do I do?...
Question regarding plywood
[ 3 Answers ]
I will be installing porcelain tiles in a small bath and want to use 3/4" exterior plywood over the subfloor. I will covering that with Ditra matting. I went to Home Depot and the only 23/32" I could find was "Certified sanded". It looked real nice on the sanded side but it was not tonque and... View more questions Search
|