Ask Experts Questions for FREE Help !
Ask
    Martyp's Avatar
    Martyp Posts: 18, Reputation: 1
    New Member
    		  
    #1

    Jun 19, 2008, 06:51 PM
    Murry mower repair
    How do I replace the pull rope on my Murry lawn mower as the rope broke and the mechanism is riveted down. Do these rivets need to be drilled out and replaced with screws?
    Northern Mike's Avatar
    Northern Mike Posts: 44, Reputation: 4
    Junior Member
    		  
    #2

    Jun 20, 2008, 01:03 AM
    There should be 4 bolts to remove and the entire top should lift off. Do not rmove the rivets.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #3

    Jun 20, 2008, 07:38 PM
    You do not need to drill the rivets, unless the spring is broken. Remove the entire blower housing and remove the old rope, wind the spring, insert the new rope.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murry Lawn Mower [ 2 Answers ]

I have a Murray riding lawn mower 11hp 38" and I do not know how to tighten the tension belt, how do I do this, or where is the screw for tightening it.

Murry riding mower [ 3 Answers ]

My murry riding lawn mower will not start and we have changed the battery but still can not figure it out

Murry lawn mower will not start [ 5 Answers ]

Hi I have a murry garden tractor 18.5 hp twin cylinder briggs & stratton I/c engine that will not start I have replaced the solenoid and still will not start it makes a whisling sound but does not turn over do I need a starter help

Murry riding mower [ 1 Answers ]

I Have A 46 In Murry With 18.5 Engine Need To Find The Model Needing A Deck.the Id Under Seat Is Unreadable All I Have Is A Tag On The Motor.can Anyone Help? Motor-42a707 Type - 123801 Code -9512085a

View more questions Search