Ask Experts Questions for FREE Help !
Ask
    sutton's Avatar
    sutton Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 18, 2008, 08:18 AM
    Tempstar Furnace
    My packaged gas/electric 2 ton unit in on it's last leg. I am considering replacing it with 2.5ton unit from Tempstar but I have not heard must about Tempstar. Does anyone have any feedback about this brand?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jun 18, 2008, 02:02 PM
    Tempstar is OK

    If you need 2/12 ton so be it but I would have a calculation performed first to see exactly what you need. To big is not good.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need age of Tempstar Furnace [ 9 Answers ]

I have a Tempstar Furnace Model # NUGK125DK03 / 867.769442 I am trying to find out the age of this furnace. It says it is High Efficient. Can someone please tell me the approx date of manufacture or a location where I can get this info. Thanks.

Tempstar Furnace [ 2 Answers ]

I have a gas Tempstar furnace , The pilot ignites but the furnace does not it tries a few times then stops. The blower works . What might the problem be?

Tempstar furnace [ 6 Answers ]

I have an 80+ tempstar with the smartvalve gas valve. During the call for heat, the inducer motor starts, but the ignitor will not come on and light. I checked the ignitor and it is good. I checked for voltage and it is good. Could the gas valve be bad, since the ignitor is controlled by the valve...

Tempstar furnace [ 1 Answers ]

My tempstar furnace burners light and then turn off, light and turn off, they cyle about every 3-5 seconds, when they should burn continuously. What is the problem?

View more questions Search