Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to wire a 2 switch ceiling fan
[ 2 Answers ]
I have 2 dedicated wall switches for my ceiling fan box. I am now installing the ceiling fan. Unfortunately the new fan doesn't have a light kit wire. Although it has a light kit, it still only has 2 wires. How do I connect the black and white wires from ceiling fan to black, white, and red wire...
Ceiling Fan 2 wire switch problems
[ 3 Answers ]
I have a Hunter ceiling fan, it was installed about 8 years ago. The fan has 2 pull chains, one for the light and one for the fan as well as a direction switch all located on the fan body. Recently the switch at the wall has been acting up, turning on by itself and off by itself, especially...
3-way 4 wire ceiling fan switch
[ 1 Answers ]
I am replacing the ceiling fan switch, which is a 3-way 4 wire switch. My cousin accidentally pulled two of the wires out of the old switch and I cannot remember which slot each go to. The wires I am referring to is the gray and the purple. They came out of the #1 and #3 slot.
Ceiling Fan 3 way switch wire location ID
[ 1 Answers ]
While taking apart Ceiling fan to replace 3 wire light switch, the whole bottom light portion fell and ripped the wiring from the rest of the fan:eek: . The fan has a lower lighting portion and an upper lighting section above the fan. The three positions are upper only on, lower only on and both...
Need help replacing a 5-8 wire ceiling fan switch.
[ 1 Answers ]
I am trying to replace a 3 speed, 5-8 wire fan switch with a Harbor Breeze switch. The old switch has numbers 1-Blue wire, 2-Red wire, 3-Orange wire, 4-? and C-Black wire. I don't know which wire was in 4 as it fell out. The old switch is single layered with connection holes and the black wire... View more questions Search
|