Ask Experts Questions for FREE Help !
Ask
    rhondareed's Avatar
    rhondareed Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 15, 2008, 08:32 PM
    Honeywell Thermostat - Resetting
    How do I reset the Honeywell RTH320B Thermostat?
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #2

    Jun 16, 2008, 04:12 AM
    I would (early in the morning while it is cool) flip the circuit breaker to your furnace/AC and then remove the batteries from the t-stat. You want to remove all sources of power so that it will reset. I'd leave everything off for 10 minutes or so. Then, put the batteries back in and flip the circuit breaker back on. It should be reset now.

    Good luck,
    WallyH
    icante's Avatar
    icante Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Jun 27, 2012, 10:54 PM
    Whjy will my new thermostat by honeywell rth3200 B hold settings. It keep turning my a/c off
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changed over from White Rodgers Thermostat to Honeywell thermostat [ 3 Answers ]

I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I have changed over to a Honeywell programmable thermostat model RTH7400. Did all the correct wiring as stated in the books but when set to cool, the heater kicks on instead of the central air conditioning. What...

Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat. [ 4 Answers ]

I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...

Changing over from White Rodgers Thermostat to Honeywell thermostat [ 3 Answers ]

I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I want to change over to a Honeywell programmable thermostat model RTH7400. I need help in trying to figure out the wiring part of this whole thing. Can someone out there please help. I would certainly appreciate...

How do I wire my new honeywell thermostat replacing the old tempstar thermostat? [ 1 Answers ]

I am replacing my old thermostat. The old is a TEMPSTAR, the new is a Honeywell model # RTH7500. When I use the directions I end up with one left over wire. We called the Honeywell hotline, the rep. said to wire it like this: red to R, white to O, Yellow to Y, Blue to C, Green to G, Orange...

Honeywell Chronotherm IV Plus Honeywell Thermostat, T8624D [ 1 Answers ]

Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...

View more questions Search