Ask Experts Questions for FREE Help !
Ask
    jasonfurch1's Avatar
    jasonfurch1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 14, 2008, 11:27 AM
    Spark plug gapping
    I have a Briggs and Straton 11.5 hp motor and no book for the riding lawn mower My question is what should the spark plug gapping be I want to replace the spark plug.
    Thanks,
    Jason
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Jun 15, 2008, 07:58 AM
    Jason,
    Set the gap at .030"
    cypressprings's Avatar
    cypressprings Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Jun 15, 2008, 07:07 PM
    Quote Originally Posted by jasonfurch1
    I have a Briggs and Straton 11.5 hp motor and no book for the riding lawn mower My question is what should the spark plug gapping be I want to replace the spark plug.
    Thanks,
    Jason
    Try .030 to .035 that should be close... if it runs rough set the gap between .035-.040
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs 14.5 hp ohv - No spark to spark plug [ 1 Answers ]

Was mowing tall grass when it died. At first there was a small spark at the plug but now there is none. Had been having to use pickup to jump start the Huskee 38" riding mower. Where can I find a schematic for this engine. Model 287707 Type 1224-E1 Code 000531ZD

Spark plug gapping [ 2 Answers ]

I have a wheel horse 308-8 70's I don't have a manual I need to find the spark plug gapping information

Black soot on the spark plug,is it the plug. [ 1 Answers ]

My lawn mower plug has black soot on it, what could be the cause of the plug fouling out? It is a 6.0 B&S motor, also is there a certain gap for the plug and if so what is it? This problem just recently came up after 3 years of use and I don't understand what happen.:confused:

No spark to plug [ 2 Answers ]

I have a craftsman 15.5 hp rider and I was having trouble with starting it. I put a new solenoid on and it started and ran for a while, then it stopped suddenly. I thought that it was out of gas, but there was plenty. I put on a new fuel filter and that didn't work. I checked out the spark plug...

Don't get spark from my spark plug wire [ 1 Answers ]

I get spark from my spark plug wire sometimes when I don't the jeep don't start Why I don't get spark sometimes?

View more questions Search