 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
LG DVD/VHS hook up to Toshiba hd and Bell Expressview
Hi
I was hoping someone could explain how I can hook up a DVD/VHS combo unit to my Toshiba hd TV and Bell Expressview 3100 receiver so that I can otr recording feature. I have it all hooked together but when I try to record a program, say overnight, the television goes to the channel its supposed to record but it doesn't record? I've went back and forth with all the RCA cables and I can't see where I have it wrong. Frustrating! |
||||
|
||||
|
Ok this is a dumb question, but do you have you DVD/VCR unit set up on a timer to record the program? The satellite receiver will only tune to the channel, you still would need to have the other unit record it. Also make sure your wiring goes Sat receiver to VCR/DVD to TV. If you are going to the TV first it, it won't record without the TV on. Good luck.
|
||||
|
||||
|
Not a dumb question at all. I'm very grateful to anyone willing to help. And yes I have it set to a timed record. With expressview set up you just go to any program on their "Guide" page, hit enter and you get a screen that says "Create". You click on that and it's automatically set to record that program or that's how it worked with my old VCR. I'll have to check on the wiring one more time though to make sure it's the way you specified.
Thanks |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Can someone explain what a bell trap is? I have in my older home what I think are metal bell traps. Grate has a bell shaped cup that goes over drain. Is the theory that a small amount of water lays in the drain sealing the bell to drain and sewer smell out, but still allows water to drain off the...
Hi I will like to know how can I connect my vrc to a bell express vue (4100) and my TV because I will like to record a show. My vcr have 2 vid /in/out 2red and white (sound) and my TV 1 vid and 1 white and red Thanks sly
I am trying to find out information on Jeanne Bell, i.e. parents, date of birth, marriage, etc.
I have a main ring bell installed in the first floor of my house. It has a diode at the push button. Now, I have installed another ring bell in the basement but it doesn't work. I want both ring bells to work when I push the ring button. I hope somebody can help me. Thanks Hugg
Hello all, First time question asker! I have a rental property and the renters have been complaining about sewer smell in the basement when the shower is running. I had a plumber replace the cast iron drain pipe from the second floor bathroom to the basement floor (the entire stack). Across...
View more questions Search
|
