Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Meter Socket and Main Breaker Issues
[ 1 Answers ]
I just ordered a new meter socket from the utility company and it is rated for 200 amps. My friend is a certified electrician and he will be doing all the work. He advised me to get an exterior main breaker so we could relocate the interior sub panel approximately 7 foot away from the point of...
Running 2 100 amp breaker boxes on 200 amp meter base
[ 1 Answers ]
I have 2 100 amp breaker boxes,but the meter base is 100 amp.Wanting to put 200 amp metet service with disconnect box.Can some one tell me if this is possible.and how you would connect the 2 breaker boxes to the disconnect box.Thank you
Auxiliary Heat
[ 1 Answers ]
My sister is having this problem with her (electric) furnace. The heat kicks on and runs for a while and heats up the place and then it kicks off. However, the auxiliary light on the thermostat stays on and air keeps blowing out the vents. Eventually it stops but it didn't use to stay on so long....
Breaker trips when in auxiliary
[ 5 Answers ]
I have a three year old goodman heatpump and every time the aux light is on the breaker trips. I have taken the panel loose and tightened the wires and that seemed to work for a short period. It is a 50 amp breaker in a FP elec panel. My house was built in 1924 so it has the old alum wire...
What is the avg. Gas p.s.I. From gas meter on the residentcial side of meter
[ 2 Answers ]
What is the avg. gas p.s.I. from gas meter on the residentcial side of meter. I think its 5 lbs. I live in Los Angeles, don't know if it changes from state to state.:eek: View more questions Search
|