Ask Experts Questions for FREE Help !
Ask
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #1

    Jun 9, 2008, 06:42 AM
    Robert08 with bad wiring.
    This is a message from robertr08 at Ask Me Help Desk ( https://www.askmehelpdesk.com/
    ). The Ask Me Help Desk owners cannot accept any responsibility for the contents
    Of the email.

    To email robertr08, you can use this online form:
    https://www.askmehelpdesk.com/sendme...ember&u=350448

    OR, by email:
    Mailto:[email protected]

    This is the message:

    I think you're nothing but an obnoxious moron. Go yourself idiot!
    XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXX
    I received this message from a boy who didn't understand my answer. Can he be booted off for being a Jerk. I don't write him, went to respond, but am blocked, since the weasel won't receive my email, figure he can read it here. My answered was correct on this post, plus got a negative. Now am getting harassed?
    Here is the Post:
    Jun 5, 2008, 08:50 AM #2
    Stratmando
    Ultra Member





    Join Date: May 2007
    Location: Florida Keys
    Posts: 3,428
    I would use a Meter to check switching, May be the type switch that does one light or set of lights, another pull does other set, another pull lights all lights, and final pull is off. Say black is common, that goes to black from fan, blue could go to single light, red could go to other lights, all whites tie together.
    If you eleminate bottom center light, you could have 2 opposite lights on one pull, and the other 2 opposing lights be the second pull.

    Comments on this post
    Robertr08 disagrees: off in left field somewhere
    Fr_Chuck agrees: balance
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #2

    Jun 9, 2008, 07:49 AM
    Strat,

    From here on, Robert08 will get no answers from me.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #3

    Jun 9, 2008, 12:22 PM
    Hey Donf, Thanks, I could see if My answer was "Out There", It was basically same answer as ceilingfans, just worded different? Can't please eveyone. Take Care

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My wiring [ 2 Answers ]

I have a 5-wire unit. I changed my totaline p374-0200 thermostat to another and when in process, lost the wire labels. Now my a/c does not kick on, but when I use "cool", it turns on the heat. What is the proper wiring diagram for a 5-wire thermostat using a chas roberts totaline p374-0200?

Wiring 50 amp hot tub [ 5 Answers ]

We have a circuit breaker box installed in 1977. Breakers are not at the corner hardware store. We need a 50 amp breaker, the hot tub requires 6/2 with ground wire. My question is: Are two 30 amp breakers bolted together equal to 60 amps? If they are can that be used for the hot tub? Keep in...

Janitrol wiring to rth3100c wiring [ 1 Answers ]

I've taken off the cover and the wires are all OK but the black one where does it go to? My heater won't come on (well some times the AC come on with out me turning it on.)

Honeywell wiring different from old thermostat wiring [ 2 Answers ]

I purchased a non-programmable digital thermostat to replace an analog thermostat with wiring red, white yellow and black. How do I match the wiring? HELP!!

John Deere - My dog ripped the wiring Out - Need Wiring Diagram or photos [ 2 Answers ]

I have a 3 year old L110 that ran fine until last week. I think my dog chased a chipmunk up under the hood and in trying to get to him ripped a bunch of wires out. I have spliced back together the obvious wires (color coded) but I have one black wire that I assume is a ground(?) and the two...


View more questions Search