Ask Experts Questions for FREE Help !
Ask
    marvind121's Avatar
    marvind121 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 8, 2008, 06:33 PM
    Garage door openers conflicts with each other
    I have one Sears garage door opener and one Overhead door opener.

    The Overhead remote will periodically will open the Sears door.

    I have reset both openers by pressing and holding the learn button for up to 60 seconds.

    I have unplugged the Sears, pressed the learn button on the Overheard and retrained it's remote.

    This issue just started when I was programming GMC remote in my Yukon, I have also erased the program in the Yukon and started over in it also.

    HELP
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Jun 9, 2008, 10:58 AM
    Lets first mention that Sears does not make anything so it's a guess who made that unit. They may not be on the same frequency but there can be a little spill over of the radio band and sporatic unwanted operation could happen. Try moving the antenna on both openers, point in opposite directions might help.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Overhead Door garage door opener light just blinks? [ 5 Answers ]

:confused: My 15 y/o Overhead Door (brand) garage door opener was working fine opening & closing until a few days ago. It has very low usage because I mostly park my car outside the garage door. Now when I press the remote control w/ new battery OR the hard wired wall switch, the light on the...

Garage door opener making loud noise and door won't go up [ 1 Answers ]

When I pushed the button to open my mom's garage door, the door went up about an inch and made a loud banging noise like a machine gun. We got the door to open by pushing on the button and pushing up on the door. The noise is coming from the part in the middle of the garage door that goes down...

How do I sync the keyless pad garage door opener to the main garage door opener? [ 3 Answers ]

I mistakenly gave someone my garage door opener that didn't return it. I had a male friend come over and "change the code" including my car opener and gave me a universial which he also programmed. I came to realize my code for my keyless pad outside doesn't work (since he changed the code... )....

BOTH garage door openers quit working [ 4 Answers ]

The remotes used to work but we've only been renting here 8 weeks. They worked for a couple weeks and then just quit. You can open the door using the button inside the garage but neither of the remotes will open or close the door at all now. We have changed the batteries so that's not the problem. ...

Garage door opener prevents door from opening all the way -- how to fix? [ 1 Answers ]

My wife and I moved into a house three months ago and we didn't realize this problem before we bought it. I'm trying to solve a problem with an existing garage door and Genie opener which due to the amount of backroom along the tracks, doesn't allow me to open the garage door the full length...


View more questions Search