Ask Experts Questions for FREE Help !
Ask
    fonnzy8's Avatar
    fonnzy8 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 8, 2008, 02:36 PM
    Pulsing brakes on 2000 tacoma
    Having a problem with pulsing brakes on my 2000 toyota tacoma any ideas??
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Jun 8, 2008, 02:54 PM
    Likely, you are experiencing Lateral Runout (LRO), where the disc's axis and the spindle's axis are off. This frequently comes about when discs are turned on the lathe's axis, not the spindle's. When you apply the brakes you experience pulsation. One solution is to have the discs turned on a ProCut Machine. Maximum LRO is usually .003 in. Rust on the back of the disk and on the hub can also contribute to excessive LRO.

    It's best to stick with OEM pads and discs. Many problems come about from using inexpensive aftermarket brake parts.
    kitch428's Avatar
    kitch428 Posts: 1,440, Reputation: 152
    Ultra Member
     
    #3

    Jun 8, 2008, 08:33 PM
    I agree with TX completely. I use a Pro cut machine several times a week and you just can't beat it. Go with OE pads and be done with it!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sharp pulsing pain in mid left groin [ 1 Answers ]

I have a sharp pulsing pain (every 3 to 5 seconds) in my left groin area (upper front area). I can almost put a finger on the spot that hurts. I had noticed a pain in that area all day, but it is growing stronger. I've had a history of kidney stones, but remember that pain being toward the...

2003 toyota tacoma 6 cyl [ 4 Answers ]

I recently purchased it from certified toyota dealer. Where is fuel filter?? I also am considering to replace battery with a Optima battery. Thanks John :confused:

Lights pulsing dim every 30 -45 min or so [ 5 Answers ]

New house just built, it seems the lights, flicker dim for a moment about 30 45 min apart, I can't seem to associate with large appliance activation, it happens when all a/c is off. Seems to happen on all circuits, the lighting is run through a sub panel feed off a main panel out side, also...

Brakes 2005 Honda Accord brakes? [ 3 Answers ]

How hard are the brakes pads on a 2005 honda Accord to change?

Left groin pulsing pain [ 1 Answers ]

I have had a sporadic pulsing pain in my left groin going several inches down into my leg on and off for a few months now. It is not hugely painful but worrying nonetheless. Any ideas? I don't think there is an ovulation connection.


View more questions Search