Ask Experts Questions for FREE Help !
Ask
    blairmorrison's Avatar
    blairmorrison Posts: 3, Reputation: 0
    New Member
    		  
    #1

    Jun 7, 2008, 06:12 PM
    Replaced gas line now 2002 huskee rider will not turn over
    Had mower running, but noticed gas line was corroded and has broken as gas was pouring out of line. Shut the mower off, replaced the gas line, then could not get it to start again. Thought it was battery, replaced battery, not even a click when you have a dead battery. Gas gets to the carb, the gas line is clear, I can see it go in. Have had to dump gas in carb to get it to start before... Not sure what I should do?:confused: (2002 Huskee LTD Model # 13AJ608H131 21 HP Briggs and Stratton engine with 46" deck)
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Jun 8, 2008, 08:30 AM
    Remove the bowl of the carb, see if there is any contaminants in the bowl, such as water, or debris.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #3

    Jun 8, 2008, 04:26 PM
    Quote Originally Posted by blairmorrison
    Had mower running, but noticed gas line was corroded and has broken as gas was pouring out of line. Shut the mower off, replaced the gas line, then could not get it to start again. Thought it was battery, replaced battery, not even a click when you have a dead battery. Gas gets to the carb, the gas line is clear, I can see it go in. Have had to dump gas in carb to get it to start before... Not sure what I should do?:confused: (2002 Huskee LTD Model # 13AJ608H131 21 HP Briggs and Stratton engine with 46" deck)
    Quoted:
    "Had mower running, but noticed gas line was corroded and has broken as gas was pouring out of line. Shut the mower off, replaced the gas line, then could not get it to start again."
    Assumption, hmm, could have gotten trash in line, correct?
    Quoted:
    "Gas gets to the carb, the gas line is clear, I can see it go in. Have had to dump gas in carb to get it to start before... "
    Assumption, hmmm, could be the fuel solenoid, correct?

    Another new comer not knowing how to use the rating system.
    And as far as the solenoid, they stated, " not even a click when you have a dead battery."

    Ohh well, live and learn.
    blairmorrison's Avatar
    blairmorrison Posts: 3, Reputation: 0
    New Member
    		  
    #4

    Jun 9, 2008, 11:36 AM
    I didn't mean to click that I disagree! I tried to go back and fix it, but I couldn't figure out how to.
    blairmorrison's Avatar
    blairmorrison Posts: 3, Reputation: 0
    New Member
    		  
    #5

    Jun 9, 2008, 11:37 AM
    Trash in the line? What? I never meant to give a bad mark... Wow.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #6

    Jun 10, 2008, 04:58 PM
    Hmm, good luck!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

MTD rider won't turn over [ 6 Answers ]

I have a 10 year old MTD rider 17.5 HP 7 speed. I replaced the battery about a month ago and it started right up. I went to use it again and nothing. Turn the key and it doesn't make a sound. I tried turning the lights on and nothing. I think the battery is fine as I hooked up an inverter and...

Replaced thermostat, now heat won't turn on [ 8 Answers ]

We recently replaced an old thermostat with a programmable thermostat, and now the heat won't kick on. My husband said he switched the wires directly over, and the AC works fine. But when we switch to heat we can hear the unit turn on, but the fan doesn't turn on or blow out anything. This is a...

Sears rider blades won't turn [ 1 Answers ]

I replace the engine on a used Sears 42", 6 speed riding mower. My problem is that when I engage the blades the engine stalls. The belt, 1/2" wide seems to be in a bind in the engine pulley groove. It will turn the blades if I manually turn the engine in the reverse direction, but not going in...

Replaced Main Water Line, Now Shower Line Is Clogged [ 3 Answers ]

We had a leak, so we had the water line and sewage line from the house to the street replaced. Now we have no water in the shower. Some debris most have clogged up the line coming into the shower. All the other lines are fine. My Dad is somewhat of a handyman and wants to fix the problem...

View more questions Search