Ask Experts Questions for FREE Help !
Ask
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #1

    Jun 7, 2008, 04:25 PM
    Marking a voltage and current carrying "White"
    Curious,

    Currently, we are living in a home that was built in the Late 50s or early 60s. The home is wired with copper.

    A ceiling fan and light package failed today and I traced the failure to a three way dimmer switch that was outputting approximately 28 VAC. I figured the led circuit was blown so I went out and got two standard three way switches. No dimmer switches!

    When I was installing them I found that neither White to the switches had be tagged with black to indicate a current carrying conductor.

    Does anyone remember when the marking of white with black tape was first required by the NEC?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Jun 7, 2008, 04:56 PM
    New in 2002:

    200.7 Use of Insulation of a White or Gray Color or with Three Continuous White Stripes

    (C) Circuits of 50 Volts or More
    The use of insulation that is white or gray or that has three continuous white stripes for other than a grounded conductor for circuits of 50 volts or more shall be permitted only as in (1) through (3).

    (2) Where a cable assembly contains an insulated conductor for single-pole, 3-way or 4-way switch loops and the conductor with white or gray insulation or a marking of three continuous white stripes is used for the supply to the switch but not as a return conductor from the switch to the switched outlet. In these applications, the conductor with white or gray insulation or with three continuous white stripes shall be permanently reidentified to indicate its use by painting or other effective means at its terminations and at each location where the conductor is visible and accessible.



    Tape is NOT a permanent and compliant means of re-identifying a small conductor.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #3

    Jun 7, 2008, 05:03 PM
    Stan,

    It will have to do for now.

    So it only became an issue in 2002, thanks. I've been marking with tape since I was a teenager. That's what I was taught to use.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #4

    Jun 7, 2008, 05:36 PM
    Nothing wrong with tape, other than the sticky mess it makes after a few years. It's just that it is not a code compliant way of re-marking a white in this case.
    I have been using a Sharpie marker for many years.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Eviction of current "resident" during home sale [ 2 Answers ]

We are in the process of purchasing the home of my husband's grandfather, who died in mid-February. His aunt, who has lived in the house for over 20 years, will live with us and is the executrix. His uncle lives in the house sporadically (as in one day out of each week, at most), and otherwise...

In "The Syringa Tree" : meaning of white spots on fingers [ 1 Answers ]

What is folkyore meaning of the cresents or white spots on fingers

Children's fantasy movie, white pony "maramis" [ 2 Answers ]

Looking for the name of a movie that was out in the late 80;s or early 90's, children's fantasy with a white pony named Maramis?


View more questions Search