Ask Experts Questions for FREE Help !
Ask
    BeverlyRicearon's Avatar
    BeverlyRicearon Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 7, 2008, 12:34 PM
    Hampton ceiling fan repair
    Where can I fine a light kit for a 42" Ceiling fan named The Flortine?:) Beverlyricearon

    >Moved from Forum Help<
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jun 8, 2008, 11:53 AM
    I am not familiar with a 42" Florentine. The model currently sold is 56" and not light adaptable to my knowledge.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling Fan repair [ 15 Answers ]

I have a Hampton Bay ceiling with remote control. It is a rather large fan installed on a vaulted ceiling. The fan model is AC 385 (not sure if 385 is part of the model number). It has two light fixtures. One on above the fan and one below. Both are also remote controlled. I vacuum dust from...

Ceiling fan repair [ 2 Answers ]

Hi there. I have a remote control (no pull) hampton bay ceiling fan. I originally hooked it up to a wall plug with a dimmer. Bad! It worked for a while until the little black box blew up! I then changed it to a wall plug without a dimmer and replaced the little box. Since then, the remote works...

Ceiling fan repair man [ 4 Answers ]

Dude you are a freakin genius. Ive been sitting here for 3 hours trying to figure out my wiring issue. I read one of your responses that simply said He has 4 ceiling wires, and a receiver that connects with two wires (to the ceiling). The receiver also connects with four wires to the fan. ...

Ceiling fan repair [ 1 Answers ]

How to repair a ceiling fan .it hums so it has power ,will not spin .What next?

Hampton fan repair [ 2 Answers ]

I have a hampton bay fan that is only fan, no light. I tried to put on a light kit but cannot get power to the light. The switch works nothing, the fan works by pull cord. I assume I have to take the fan down and open it to attach a power source. Before I do this, I am looking for any advise...

View more questions Search