Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Old Luxaire condenser fan has gone bad
[ 3 Answers ]
'76 Luxaire res unit, model EEC048FAB, sercial 195103002440, with condenser fan motor from Electric Motors and Specialties. Motor mmodel 9-131HU416-01, 1/4/hp, 230V, 1 ph, 60hs, 2.8 amps, 800 rpt, rot ccw, serial p76. Fan motor bearings bad - have been super-lubeing it for yers to keep it going but...
Condenser wiring
[ 1 Answers ]
What type/size wiring for 3.5 ton condenser?
Condenser Fan won't stay on
[ 14 Answers ]
My A/C system is 17 years old and for the first time the condenser fan stopped working. So I thought it would be the motor so I replaced both the motor and the capacitor at the same specifications. Turns out I'm still having the same problem. The fan will start when I first turn everything on...
AC condenser not kicking on.
[ 1 Answers ]
I live in SW Florida and yeasterday there was a power outage that left us without power for some time. FPL said that there was a main line that was tken down by a tree. We did not immediately turn the AC on after the power came back on (the thermostat was off when power returned). We turned it...
Condenser wiring
[ 2 Answers ]
Hi, I am installing wiring for a new central air condenser that is being installed next week, and I wanted to make sure I was not missing anything. The HVAC installer told me that I needed #8 and 40 amps. I have a flexible whip to go from the disconnect to the condenser and have run (2) #8 wires... View more questions Search
|