Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Leviton PR150 Motion LIght Control Flickers light instead of keeping them on
[ 4 Answers ]
Hello, I installed a Leviton Motion Sensor Light Control (PR150). In the on position it works fine, the lights are one. But on auto it seems to only flicker the lights. They do not get to full brightness and they flash. It looks like the sensor is also acting weird as the LED light on the...
Water heater pilot light gets extinguished by main burner ignition.
[ 1 Answers ]
Problem: Water heater pilot light gets blown out by main burner when it ignites. Background: About eight or nine days ago I installed a new Rheem LP gas fired water heater. I had to convert (change / install) the main burner jet and pilot light orifice to burn LP gas as well as change the...
Car ignition key
[ 2 Answers ]
Last night I went shopping and when I cam out of the store I could not get my car's ignition key to turn. I tried every which way.. but no good so I left the car in parking lot and took a ride back home. Car is a 92 Honda accord. Any idea of what I can do? Thanks, Al
Key will not come out of the ignition.
[ 1 Answers ]
I took my Jeep to have turn signals checked .They were working sometimes sometimes not. They replaced the flasher which was under the dash . After I took the car home I can not get the key out. Of course the repair shop is closed any ideas . I have tried moving into park several times . It will...
Gas furnace intermittent electric ignition won't light pilot
[ 1 Answers ]
I have a Carrier gas furance with a pilot that lights by an intermittent electric ignitor. Occasionally, when the thermostat calls for heat, the electric ignition will spark repeatedly but ultimately, the pilot will not light. If I turn the thermostat off and then back on again, the problem... View more questions Search
|