Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Low water flow from bath faucet after new water heater
[ 7 Answers ]
I just had my water heater replaced by a plumber. Now the hot water flow and pressure is about 1/4th of what it used to be at the upstairs tub faucet. Other faucets in the same bath seem low as well but it is hard to tell. The bath tub faucet had great flow before and would fill the tub in 5...
New water heater, no hot water pressure in 2 bath/showers
[ 3 Answers ]
A new water heater was installed yesterday, but I have no HOT water pressure in either of my showers. Is it the old fixtures, or a leaking pipes?
No hot water in bath tub
[ 1 Answers ]
I have a single knob on my bath tub that controls the hot and cold water. When you rotate the knob a half way it is cold water and a full way it is hot water. The cold water comes out, but the hot water does not, just a drizzle. I removed the faucet and found there is one pipe coming out of the...
No water to both sinks / very low cold water pressure to bath and washer
[ 1 Answers ]
My kitchen and bathroom sink have no water, period. Hot water seems to be pretty good to the bath and washer but cold water to those 2 locations are very weak. The outside faucet is very weak at best. I have had this problem for quite some time so it's not the fact that they are frozen. I just...
Bath tub shower spout & head running water running at same time
[ 1 Answers ]
I started with a slight dripping problem(sayko system).i decided to replace all 3 stem assemblies together as they all were about 18 years old.after reassembling the new stems(danko brand),turned on the water supply & checked faucets.hot & cold worked fine but when the shower was turned on,water... View more questions Search
|