Ask Experts Questions for FREE Help !
Ask
    LindaBrown48's Avatar
    LindaBrown48 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 1, 2008, 01:02 PM
    Cannot remove globe from ceiling fan Hampton Bay
    I saw the previous posts, but we still cannot figure out how to get the glass globe off our ceiling fan. We have tried slowly turning globe, but do not detect anything lining up to pull off the globe. Will it pull down? Is there another piece holding it up? Is it a twist and turn?
    The actual problem is that the remote will not shut off the light. It is a dimmer light with 3 settings. At this point, I would be happy just removing the light bulb, but can't get the globe off!
    Where are the receiver setting for the remote in the fan... under the globe I am assuming.

    Thank you for your help.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jun 1, 2008, 03:10 PM
    If Counterclockwise from below doesn't work, It may take excessive/dangerous pressure to free up, gloves and eye protection can only help.
    I have gotten all off but wonder if cooling globe with Ice could help?
    Sounds like yours unscrews and not the three screws?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Jun 3, 2008, 10:19 PM
    The receiver is either in the canopy or in the motor housing. Have you checked at the ceiling?

    Does the remote LED light up when you attempt to control the light?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #4

    Jun 4, 2008, 05:20 AM
    Does remote work for fan?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I change the light /remove the globe in hampton bay fan windward II model? [ 10 Answers ]

Hello I have a Hampton Bay - pretty sure it is model #55295 (comes with remote forward/reverse) - the light just went out and I can't figure out how to get the globe off to change the light bulb. I swear we had a professor, an IT guy and another idiot (that's me) who should have collectively been...

Hampton Bay Ceiling Fan Light globe replacement [ 4 Answers ]

I have a 52" Hampton Bay Ceiling fan with a light kit. While cleaning the globe, it fell and broke. The globe had a hole at the bottom large enough to allow three pull chains through. I have not been able to find a replacement globe anywhere.:confused: Can any one help locate this globe?...

Removing the globe from a hampton bay ceiling fan [ 1 Answers ]

How do you remove the globe from a hampton bay ceiling fan

Hard to remove mini spot light from Hampton Bay Ceiling Fixture [ 1 Answers ]

We have a Hampton Bay Ceiling fixture with three mini spot lights. One of the bulbs has blown out and needs to be replaced. However, we are having a problem doing this. There is no room for us to get our hands around the bulb to remove it. The bulbs have 2 prongs that fit into the base and twist to...

View more questions Search