 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Wiring regs for boiler
Hi there,
Ive got a Worcester Greenstar 24i junior, which needs to be wired in to a double pole isolating switch. My closest power point is a single plug point under the kitchen sink. Will I be able to tap into that point and run a new point up to the boiler? |
||||
|
||||
|
Not certain where you are or enough details to give a good answer, but don't do it from the outlet. You should have a dedicated circuit from the breaker panel serving the furnace only. It can be done other ways but a dedicated circuit is required many places and is recommended everywhere else.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
To make this short, I live in an apt. and share the boiler with the neighbors our zone was added on to the existing boiler, everything was working fine until some how my thermostat (2 wire) got disconnected. Our valve is open on manual so we only get heat when the neighbor puts there thermostat up....
I'm an apprentice electrician and currently trying to learn howto wire boilers,any step by step help would be appreciated and any simple steps when connecting in2 the main joinig/connection box that all cables go back 2 would be very appreciated
Ok, I will try to explain this the best I can with what I saw. I have an old repco boiler with 2 zones and I was wondering if the wiring was correct. The 2 zones are wired into a master control box then goes out to the pump on the boiler and the 2 thermos and another set of wires to another box(not...
View more questions Search
|
