 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Hey everybody! I'm remodeling my bathroom and removed a tile tub and plan to replace it with a cast iron one. The drain has been relocated with the J-bend under the concrete foundation. Do I need a AFR (above floor rough installation) tub or a regular. It's a LHO, 3 wall alcove. Forgive my...
Hello again! I want to hook up an electric hot tub my friend just gave me. (how lucky am I? :)) I know that it needs a 50-amp GFCI-protected 240-V circuit. I have read info regarding to where to place the outdoor switch box, etc. But there's one thing I can't seem to find. Do I install a...
I'm planning to install bathroom facilities in a small cabin with a plywood floor. The total bath area will be approx. 5' x 8'. Can you tell me if there is a proper order which to hook up the drain lines to the sewer pipe. ( I.E.vent pipe, tub, sink, toilet in that order) Does one or the other...
Hello, I have a basement rough in for a wet bar sink and I want to install the sink myself, any help I can get (with pictures if possible) would be greatly appreciated. I'm new at this.
I replaced an NF8 on the outside of my house. First, was it right to use plumbing tape to minimize leakage. Second, its still leaks a little - is there anything I can do to stop the leak. Third(and most important), when you go to turn off the water all the water in the hose will suddenly blast...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
