Check out some similar questions!
New hot water heater installed, but no hot water pressure. Plenty of cold water?
[ 11 Answers ]
Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....
Need help deciding between a tank or tankless water heater
[ 19 Answers ]
Which one saves me money; the tankless water heater or conventional tank water heater? :confused:
Connecting a tankless water heater and separate hot water heater
[ 6 Answers ]
What I have is this. An oil fired boiler that generates hot water for my house baseboard heating system. Contained within the boiler is a tankless heater that is heated by way of the firebox in the boiler. The tankless heater is used only for domestic hot water. It has a separate CW supply to the...
Knock when turn off cold water faucet
[ 3 Answers ]
Hi, I have a cold water faucet in my tub that knocks when at about 90% to the off position. Just one knock, and the water continues to flow as it normally would. ANy ideas how I can fix this? Thanks!
Knock & Flow Stop at Hot Water only to Kit. Sink & D/W
[ 3 Answers ]
At our kitchen sink we have a problem with the hot water flow. When the hot water is turned on full (a mixing faucet) either immediately or shortly after the water comes to a full stop simultaneously there is a knock. The water does not begin flowing until you turn off the water altogether. ... View more questions Search
Add your answer here.
|