Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Honeywell RTH230B
[ 3 Answers ]
I currently have a very old thermostat, White-Rodgers 135-415, which I'd like to convert to a Honeywell RTH230B. Currently there are only 3 wires that are connected to the thermostat (which is only for my apartment's heat. White wire is connected to what looks to be labeled "Common" Black...
Install Honeywell RTH230B, Removing Honeywell Q674L
[ 2 Answers ]
I am removing a old (1987) Honeywell Mercury THermostat Q472L Base that has W, R, Y, G, B, O. The RTH230B has Rc (which I assume to be B), Rh (which I assume to be R), Y (to Y), W(to W), G (to G). I have no idea what to do with the O (which I read could be the Changeover. Do I just tape it up...
Honeywell RTH230B
[ 1 Answers ]
We just moved into a house that has a Honeywell RTH230B thermostat. The house is a two story with the old style heating registars. We have no idea how to use this thermostat or set it appropriately because there was no manual in the house anywhere. Do you have a users manual or know somewhere to...
Honeywell rth230b
[ 2 Answers ]
I installed the honeywell rth230b thermostat in the house for a furnace. I hooked all the yellow wire green wire and white wire up to each of the corresponding holes for each color I have a red wire and two holes for rc and rh not sure which hole to put the wire and is it supposed to be jumpered...
Honeywell RTH230B
[ 6 Answers ]
I am installing a Honeywell RTH230B thermostat but am not sure of the wiring. I have 6 wires colored as follows, red, green, white, yellow, and 2 blue wires. Please advise? View more questions Search
|