Ask Experts Questions for FREE Help !
Ask
    sakini's Avatar
    sakini Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 19, 2008, 09:53 PM
    Plug for AC
    What is a t blade tandem plug?
    sakini's Avatar
    sakini Posts: 2, Reputation: 1
    New Member
    		  
    #2

    May 19, 2008, 09:55 PM
    Air conditioner plug
    What is a t blade tandem plug on a 220 volt air conditioner
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #3

    May 20, 2008, 03:06 AM
    Two pole 3 wire w grounding. T design (look for the tee in the picture)

    Here is a list for you

    http://www.hubbell-canada.com/wiring...t/pdf/b/b5.pdf
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    May 20, 2008, 03:10 AM
    http://www.hubbell-canada.com/wiring...t/pdf/b/b5.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

12-3 wiring from gfi plug to outlet to plug in a 110v pool pump [ 5 Answers ]

Need to verify proper wiring for above 110v pool pump.

Black soot on the spark plug,is it the plug. [ 1 Answers ]

My lawn mower plug has black soot on it, what could be the cause of the plug fouling out? It is a 6.0 B&S motor, also is there a certain gap for the plug and if so what is it? This problem just recently came up after 3 years of use and I don't understand what happen.:confused:

Replace 2-plug GFGI with a 4-plug GFCI? [ 7 Answers ]

I am remodeling my bathroom and my wife wants a 4 plug outlet. She currently uses one for the hair dryer and one to charge her electric toothbrush. The intent is to add a lighted mirror or something else that uses little power. Would it be OK to replace the GFCI with a 4 plug GFCI? I suspect...

Gfi plug [ 1 Answers ]

The GFI plug in my guest bath is about 3 months old. Yesterday it reset and I noticed that some of my plugs were not working. I hit the test button and the yellow light came on and when I hit reset, the light went off but my other plugs were still "dead". I plugged a lamp into the bottom switch...

View more questions Search