Ask Experts Questions for FREE Help !
Ask
    wnbfcal's Avatar
    wnbfcal Posts: 1, Reputation: 1
    New Member
     
    #1

    May 19, 2008, 04:01 PM
    Maple/Chase Dual Stage Heat Pump Display in F/C
    Can anyone help with a Fahrenheit/Celsius Display question. Somehow I changed the display to Celsius, the only Maple/Chase manual I've found that explains how to change the display doesn't apply to my model.

    Thanks so much for your help!

    Bob
    AndyN's Avatar
    AndyN Posts: 1, Reputation: 1
    New Member
     
    #2

    Nov 20, 2008, 06:26 AM
    Best to call 1-800-445-8299... there is an automated IVR help system which explains how to change C to F for various models.

    For my model, the 9700, hold down the set key (keep it down) then hold down V (note need to hold down V) - it changed from C to F

    AndyN

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Do I have a single or multi-stage heat pump? Want programmable thermostat. [ 4 Answers ]

Hi, I'm looking to replace my thermostat with a new programmable one, and I'm trying to figure out which ones might be compatible with my heat pump. I'm having trouble determining even what type of heat pump I have. Any help would be appreciated! Here is the information I have: On the unit...

Maple Chase thermostat - after electricity went off heat won't kick on [ 3 Answers ]

Have a Maple Chase thermostat -- undetermined age (probably 10 years or so). After electricity went out (and then back on) the heat did not kick back on. Checked batteries and fuse. All seem OK. When I set the fan to On it will just blow out cold air. (Have gas heat). Is there a reset button?...

Dual switchable thermostats for heat pump control at night. [ 6 Answers ]

I would like to have my heat pump controlled by the centrally located main thermostat during the day, but switch to a different thermostat located in my bedroom during the night. Is this possible and how would I go about wiring it? I was hoping it may be a readily available kit?

White rogers thermostat 2 stage heat 1 stage cool [ 6 Answers ]

Anyonw know how to hook this up with a dpdt relay There is 5 wires , outdoor heat for stage 1 heat , propane gas for stage 2 hear Thanks For any help :confused:

White rogers thermostat 2 stage heat 1 stage cool [ 1 Answers ]

What is the right wiring to hook the WHITE ROGERS 80 SERIES thermostat up ( 1F82-261)? I have a outdoor wood burner dlowing hear to a exchanger in the ducts , and I have propand gas as a back up sorce The furnace is a coleman evecon ( 94 model) with ac (up draft) I think I had the wiring...


View more questions Search