 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Montgomery Wards Riding mower won't start
I started my mower 2 days ago, ran it around the yard for a short time then shut it off. I went to re-start it and was just cranking and cranking wouldn't start. I pulled the spark plugs and replaced them, now it only seems to crank over once and then nothing. I pulled the plugs and seem to have spark. I checked the voltage to everything and I have voltage. Pulled the plugs and without the plugs in, the engine turns over fine. Why won't it turn over right with the plugs in?
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hello, I am new to the site. Hopefully this isn't a repeat post. I thought that I had posted before, but I can't find it. Nonetheless, here is the question. I have an older year Montgomery Ward ridding lawn mower with a B&G 12.5 I/C engine. Last season it went out on me at the end of the season. I...
I have a 17.5 murray riding mower it won't start I have a new battery I jumped across the two big post on soleloid it will turn over then does that mean the soleloid is bad if the safety switches were bad would it crank by jumping the soleloid how do you check the soleloid and switches...
We have a murray riding mower. It is a few years old. I replaced the spark plug, checked it for spark and it Started fine after sitting up during winter. I tried starting it today, 1st it tried starting but it would only spin once or 1 and a half spins. Then started hearing a grinding noise that I...
I know it is the solenoid but its been off for a while and to tell you the truth I can't remember how it wires back up if any one can tell me or send a pic of the wiring diagram I would appreciate it. The little green wire and the little red wire are what's giving me problems can't remember where...
View more questions Search
|
