Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
RTH230B Thermostat Problem
[ 3 Answers ]
This goes out to anyone who might be able to help out. I purchased a Honeywell RTH230B to replace the old mercury thermostat. I have a gas furnace w/ A/C I have a 5 wire system with the following color code. Green for the fan, Yellow is on Remote A/C, White is on the W1 (Thermostat), Red also...
Honeywell RTH230B Wiring
[ 2 Answers ]
I have an existing Honeywell non-programmable thermostat with 2 wires, a white and black. I 'd like to replace with the RTH230B programmable. After reading the Reader's Digest Do-it-Yourself book, it says I would need to add wires if I wanted to replace a non-programmable thermostat with a...
Rth230b wiring
[ 1 Answers ]
How do you get your red wire to fit in with the jumper? I can't seem to force wire in from top where the jumper is, even with the screw out all the way. Thanks, Barry
Problem with Honeywell RTH230B
[ 6 Answers ]
This message has been moved to the proper forum https://www.askmehelpdesk.com/showthread.php?p=55945#post55945
Question of wiring Honeywell RTH230B thermostat
[ 6 Answers ]
Hi, I bought a Honeywell programmable thermostat to replace my old thermostat that controls both hotwater furnace and central AC. There are 5 wires now connected to the old thermostat, red, black, yellow , green and white. In my new Honeywell thermostat, there are also five slots as follow: Rh:... View more questions Search
|