Ask Experts Questions for FREE Help !
Ask
    sheila107's Avatar
    sheila107 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 6, 2008, 12:39 PM
    Sears weedwacker 32cc
    I have a sears weedwacker 32cc. Model #358-791590. The pulley string on the inside of the motor assembly has broken. My question is how do I get the pulley off in order to replace the string assembly. I have taken out all the bolts from around the casing.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    May 13, 2008, 04:54 AM
    Some require a special tool. But you can be creative and make a tool to do the job. You have to remove the housing and the shaft usually to do this job.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Weedwacker engine on a bike [ 7 Answers ]

How would you rig up a weedwacker engine to a wheel of a bike?

Opening up the exhaust on weedwacker. [ 1 Answers ]

Out of left field, but I inherited a weedeater with my house, went to use it a few months later with similar results. Looked at the manual, and it said something about spiders nesting in the little exhaust port. Used a small screwdriver to clear it out, and it worked just fine for years afterward.

Good brand weedwacker [ 1 Answers ]

I'm trying to by a new weedwacker and there are many different brands. Is Poulan a decent brand... if not, what brand would you suggest?:confused:

Line on craftsman weedwacker [ 1 Answers ]

How do you put the line on the craftsman 21cc weedwacker? The manuel as been lost during the move and I have no ideal!

Weedwacker [ 4 Answers ]

I need to buy a new one. Any advice?

View more questions Search