 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Not sure of the model mentioned, but the first thing to have is a parts diagram, and be able to follow the assembly of the unit using the drawing. Then you will usually remove the engine, then the wheels, then separate the case. Have plenty of shop towels ready for the grease.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I took a craft class in Oklahoma City, Oklahoma a few years ago and purchased and painted a Thumb Piano. It only has 8 keys and the board is solid wood, not four sides with sound opening. Very simple in design. I have searched trying to find how to order more but all I see are made from either...
I am looking for drive cables, Tines Cable, etc. for this tiller. Green Thumb Dub-L-Tines, Model GT5R-F, Service No. 521781 Made by Lawn Chief MFG Co. Probably willl need a service manual if possible. Please help. Bill
I need some advice on how to make plants grow, and how important is sun light. I planted some seeds w/ my sun in the dirt next to the side-walk up to our home... the don't require direct sunlight, but I think the one side that gets the most sunlight is growing and the other side is not. What to do?...
Hi, I recently purchased a 8 HP Rear Tine Green Thumb Tiller. The tiller is chain driven and the tines keep locking up. I thing that something is broke and there is a piece of dabre inside the houseing. I took the tiller apart but the tine axel is keeping me form separating the housing. The...
I have a Green Thumb Garden Tiller. I need to know where to buy a replacement part for our tiller; the cap for chain drive seal. The motor is a Briggs & Straton, the plate on it says Lawn Chief 53GT. Where I can get parts? Thanks for your help.
View more questions Search
|
