Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Craftsman rider won't start
[ 8 Answers ]
Late '80's vintage 18HP, 44" rider. Been running like a champ until recently. Started running very rough a couple of weeks ago. Had to choke all the way to keep in running. Decided to start with new spark plugs to rectify. Now I don't get any spark. Turns over just fine. Amp meter on dash...
Craftsman rider will not start
[ 2 Answers ]
My craftsman 13 1/2 hp briggs&straton rider will not start. I changed the spark plug,gas and checked for spark. It seems that the spark is light but I'm not sure. Thank you austin.
Murray rider will not start
[ 6 Answers ]
I have an older Murray 12hp riding mower that has not had a problem starting until now. It started fine and I mowed and shut it down, when I went to restart the mower it would not do anything. I have replaced the starter silinoid, switch and checked all the safety switched and still nothing. I...
Old Murray rider won't start
[ 1 Answers ]
My old Murray rider (mfg. date 0092) will not start. Battery is good. It turns over intermittently. Some times, it turns over strong and continuous. Other times, won't turn over at all. When it turns over good and won't start, positive battery cable gets very hot. Don't know if my problem is:...
Murray Rider Will Not Start
[ 1 Answers ]
I have a Murray Select Ridding Mower model # 425600x8A it will not start? The fuse is fine. The seat switch was disconnected the key switch is on the funny thing is that I disconnected the battery ground side and when I touch the cable to the GR post the engine turns over, but no spark. I noticed... View more questions Search
|