Ask Experts Questions for FREE Help !
Ask
    hvacservicetech_07's Avatar
    hvacservicetech_07 Posts: 1,083, Reputation: 75
    Ultra Member
    		  
    #1

    Apr 29, 2008, 06:47 PM
    Huskee riding mower parts
    I'm looking for some parts for a Huskee riding mower, I have a model number but, I do not have a book. Anyone know of a good resource? Thanks!
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Apr 30, 2008, 04:50 PM
    Mtd makes huskee now, you may try an mtd dealer. Or mtdparts.com
    deerhunter77's Avatar
    deerhunter77 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Aug 18, 2010, 07:55 PM

    Try 605-254-2599 he is a mower salvage
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Huskee riding mower won't go into gear [ 3 Answers ]

I've had a Huskee LT4200 riding mower for several years with no problems; runs like a top until... Yesterday I idled the mower to empty the grass catcher but then couldn't get the mower to move. When I engage the transmission catch (in lower back) in order to push it to the garage to look at it,...

2005 Huskee riding mower PTO won't engage and mower dies [ 12 Answers ]

Replaced battery with new one, within several starts the new battery was drained. Mower will start by jumping but only runs a few minutes then dies, also the PTO will not engage at all (replaced PTO switch and still won't engage) does not even attempt to engage, as if there is no power to the...

Huskee riding mower valve adjustment [ 1 Answers ]

I have a 42" cut Huskee riding mower with a 16hp Briggs and Stratton engine. Every year the valves need to be adjusted, it will not start or it's hard to start. This last time it went from kicking back and hard to start, to spinning over like it had no compression. I had started the mower and it...

Huskee riding mower clutch issue? [ 10 Answers ]

I have a newer (2005) Huskee riding mower with 50" cutting deck. Mower was working fine, then suddenly the blades stopped cutting and pulleys stopped turning. Now I cannot get the clutch to engage at all. Do I need to replace the clutch? And is this something I can do myself?

View more questions Search