Ask Experts Questions for FREE Help !
Ask
    freddybnb's Avatar
    freddybnb Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Apr 29, 2008, 02:42 PM
    96 integra power to icm but no spark to motor
    Hello everyone, Stuck with this problem please help. No spark to the motor new distributor, wires and plugs found alarm wire loose could this be the cause?
    freddybnb's Avatar
    freddybnb Posts: 5, Reputation: 1
    New Member
    		  
    #2

    Apr 29, 2008, 02:46 PM
    Quote Originally Posted by freddybnb
    Hello everyone, Stuck with this problem please help. No spark to the motor new distributor, wires and plugs found alarm wire loose could this be the cause?
    Background drove for about ten minutes stop at liquor stor and car just cranked but does not turn over test lighted everything and power make it to the coil but not to the motor thank in advance
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #3

    Apr 30, 2008, 07:28 AM
    Yes. Read Sections A and B:

    https://www.askmehelpdesk.com/cars-t...das-46563.html
    freddybnb's Avatar
    freddybnb Posts: 5, Reputation: 1
    New Member
    		  
    #4

    Apr 30, 2008, 10:30 AM
    Ecu code is a lit check light with paper clip in code 0 is that right thanks
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No spark, acura integra 95 non-vtec [ 3 Answers ]

I have been going crazy checking everything possible, when I try to start my car a check engine light comes on. It is code 15 which is ignition output signal. The engine cranks and the fuel pump primes. I checked my coil for resistance and voltage and it passed. I tested the ICM (igniter) for...

Honda Integra no spark Broken I desperately Need Help [ 4 Answers ]

My 1993 si/gsr 1800cc vtec integra won't start, I had I running for around 20 minutes then all of a sudden it died and since then has not restarted! It had been sat outside for around 5- 6 months! It cranks with no spark! Ok I have done the following things 1. checked fuel pump - good 2....

Wire Motor for 220 outlet Power from 110 power [ 1 Answers ]

I need to wire this sander for 220 power and do not understand the diagram well enough. Currently I believe it is wired for 110 shown in picture. Please advise about correct wiring for 220. Thank you 2 attachments

10hp motor, unknown brand no spark! [ 4 Answers ]

I have a 10hp motor. It has no spark. I tried testing the coil, but I think I did it wroung. What could be the problem?

No power to main relay. 90 integra [ 3 Answers ]

I've replaced the distributor, ecu, main relay, and fuel pump with nothing to show. Checked all fuses haven't checked all relays since I don't know how. No ecu blink, fuel pump won't turn on. It started this when I had to jump my car. It had an old viper alarm that was removed after it broke down....

View more questions Search