Ask Experts Questions for FREE Help !
Ask
    colepea's Avatar
    colepea Posts: 10, Reputation: 1
    New Member
     
    #1

    Apr 28, 2008, 06:20 PM
    No display on thermostat
    There is no light or display on my thermostat. How can I resolve this issue?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Apr 28, 2008, 07:52 PM
    First check batteries if the thermostat has them. Next check the 24 volt transformer in the furnace to se if it is working and supplying voltage to the thermostat..

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No display is showing on my thermostat [ 2 Answers ]

I have a honeywell thermostat and my display is not working. Is my thermostat bad?

Noma Digital Thermostat - Display issue [ 3 Answers ]

Hi, I was doing the simple task of changing the batteries on my Noma digital thermostat. When I put the new batteries in the display went blank and I can't for the life of me get it to come back. Any suggestions? Scott

Air conditioner thermostat has no display [ 2 Answers ]

This may be a dumb question I have a Carrier Air Conditioner and the display shut off I took off the thermostat cover and there appear to be 2 small cylinder batteries but you can't remove them Does the power come from them, and if not... how do I fix?

Thermostat T8001 Display goes On and Off by itself. [ 2 Answers ]

I have 2 Honeywell T8001 thermostats - on the downstairs the display goes blank and then comes back on randomly. I have took the downstairs thermostat and installed it upstairs and it works fine. When I put the upstairs thermostat downstairs, it goes blank and comes on randomly. There are no...

Thermostat display is blank [ 6 Answers ]

I have a Honeywell programmable thermostat and the display is blank. We had a bad storm and the power went out. I have checked the breaker and reset it. The blower will come on when I switch it to ON, but nothing else works. Can someone help?


View more questions Search