 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
We need much more info. Is there power to the pressure switch? Is the pressure switch working? Do you have a low pressure cut off on the pressure switch? (little lever on the side that you lift and hold until the pressure comes up far enough that things will work automatically) If not, is there power to the pump? What is the current draw when the pump is running? What should the current draw be? Is the pump short cycling? Almost certainly the hot water heater has nothing to do with this.
EPMiller |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Can anyone give me a reason as to why nearly completely cold water is coming out of my hot water tap in my bathroom but when I run the hot water tap in the kitchen the water is nearly boiling. The hot water and cold water taps are separate in the bathroom, where the kitchen has a handle which...
Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....
I'm still experiencing low hot water pressure even after replacing the water heater. When you first turn on the faucets the pressure will be fine but within a few seconds it drops again.
I would like to know if I go away for two days and shut my main water shutoff valve can I leave my gas hot water tank on. I saw two answers To a similar question and one answer said you can leave it on and the other Said you had to shut it off. I am confused now as to whether I can leave the gas...
View more questions Search
|
