Pulling wire in pvc

labonte318 Posts: 2, Reputation: 1

New Member

Apr 19, 2008, 06:37 PM

Pulling wire in pvc

How many # 6 thhn can you pull in 3/4 pvc

stanfortyman Posts: 5,598, Reputation: 279

Electrical & Lighting Expert

Apr 19, 2008, 06:49 PM

Three in Sch 80
Four in Sch 40

3/4" conduit is a bit small for anything that would need any #6.

Add your answer here.

Check out some similar questions!

Pulling wire through conduit [ 9 Answers ]

I have to pull 3, #4's and 1, #8 (150' ea.) through 1 1/2" PVC. There are 2, 90 degree bends. Am I better off to pull 1 or 2 wires at a time, with a additional pull rope, or just pull all 4 at one time. I have plenty of lubricant available. Comments? Suggestions? Thanks

Hard wire 3 wire to 4 wire 220 service [ 1 Answers ]

How do I hard wire my 3 wire (red,blk & bare copper wires) 220vac cooktop to the 4 wire (black/white stripe,black/red stripe, blk/blk & bare alum wires) in the house supply j-box ?

Hard wire 3 wire to 4 wire 220 service [ 2 Answers ]

How do I hard wire my 3 wire (red,blk & bare copper wires) 220vac cooktop to the 4 wire (black/white stripe,black/red stripe, blk/blk & bare alum wires) in the house supply j-box ?

Pulling wire through conduit [ 2 Answers ]

I currently have 100' of 10/2 UF cable running underground through 3/4" PVC conduit. I need to pull the 10/2 out, and pull in 10/3 UF (or its code equivalent) to replace it. I have 3 questions: 1) Is 10/3 UF cable always produced in a flat configuration, or does some company manufacture a round...

3-wire home, 3-wire fan, 2-wire remote [ 9 Answers ]

Greetings, My home is 3-wire. I bought a Hunter ceiling fan (model 23811). The fan came with a remote assy. That I do NOT want to use... The fan has standard 3-wire connections (black, white, blk&white strip, ground). The remote receiver home-side wiring looks to be for 2-wire (blk and white)....