Ask Experts Questions for FREE Help !
Ask
    ezriderga's Avatar
    ezriderga Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 19, 2008, 11:27 AM
    Goodman gas furnace.relight after turning off gas at meter?
    Hello, First time posting. Maintenance tech at local college. I'm working at home today though. I am relocating a gas line in the living room and need to turn the gas off at the meter. We have a Goodman gas furnance(duel fuel system)with electronic ignitnor. When I turn the gas to the house back on, will I be able to operate the furnace immeadiately, or is there a procedure I will have to follow to get it where it is operational again? Any other info I need to know? Thanks, Ez
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Apr 19, 2008, 11:42 AM
    You will have to bleed the air from the gas line at the furnace. It should be ready to go. If it won't light the first three tries from air being in the line you will need to kill power going to the furnace for a few seconds to reset the control board and try it again. Good luck.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace controlboard [ 1 Answers ]

I have a Goodman furnace. At first the furnace blower was going on and off when the flame was on. Heard clicking noise like it was recycling. Control board was showing 4 lights which means open limit switch. So why replace control board? But I did on advise and had it replace by the technician. ...

Goodman furnace do not work [ 1 Answers ]

I have a Goodman furnace. The combustion air blower works but it will not ignite. It has an electronic ignition.

Goodman furnace Humidifier [ 1 Answers ]

How do I hook up a humdifier to goodman furnace

Goodman furnace [ 2 Answers ]

My Goodman furnace will light and then go out. This will occur 3 times, then will quit running. The control board blinks 1 time and tells me to Check Gas flow, gas pressure, gas valve, and flame sensor. It seems to have gas going to the valve. Could this be a bad gas valve? Or a bad Flame...

View more questions Search